THIS IS ONLY THE PCB. YOU WILL NEED TO ORDER PARTS TO ASSEMBLE IT:
- 6x XT30 Male
- 1x XT60/30 Female + Wiring (14-18awg recommended)
- 6x JST-PH 2.0
- 6x 1×2 Pin Headers Male
- 3x 3 Pin JST-XH Male
- 1x 7 Pin JST-XH Female + Wiring
- 1x Pin Jumper
This is the PCB only. THIS BOARD HAS FLAWS:
– Not enough room for batteries with PH2 soldered directly onto battery (like these)
– 2S Balance Lead Silkscreen is printed backwards!!
If you don’t want these flaws you’ll have to wait on the next batch (probably pre-assembled)
The best series board on the market! Supports 1-6x 1s batteries connected at a time and up to 3x 2s batteries connected via balance lead. Connects to any standard LiPo charger and makes it easy to storage charge many cells at once.
If you connect this with 6 300mAh batteries, you will want to charge at 0.3 amps in 6s mode. Do not add the capacity of your batteries.